| |
Stand-alone process equipment. Complete lines.
Pipelines. For solid and fluid substances. Hot or cold. Pressurized
or unpressurized. We assemble, install, commission your equipment
and train your staff. Put together your very own individual Glatt
service package!
Process equipment
Process equipment and process lines are complex
systems, in particular those incorporating products from different
manufacturers.
Assembly time is costly. Glatt equipment is constructed in the factory
under the watchful eye of the installation staff. Interfaces, deadlines
and material requirements are defined in advance, saving time and
money for on-site installation.
We will supervise your own installation team, or take complete charge
of assembly and installation ourselves. Just the way it suits you.
Our many years of experience make it simple for us to integrate
products from different manufacturers. But for you, what counts
is being able to rely on a single, central contact partner.
Your plant or line can naturally be commissioned and handed over
by specialists working in our company. At the same time, we will
instruct your operating staff and provide training for your service
technicians.
And you can also rely on us when it comes to Calibration,
Qualification and Validation.
 |
 |
 |
Glatt fluid bed
Granulator WSTPRO
500 SC SuperClean® |
Glatt final
assembly |
|
Supply media
Everything from one source? Glatt will not only set up your process
equipment, if required it will also take care of all supply systems
installations: Steam, hot water, warm water, cold water, brine,
compressed air or electrical installation. Any necessary insulating
work. Needless to say in compliance with all the relevant standards
and regulations.
|
|
 |
Heating distributor |
Brine distributor |
Intake and exhaust air supply |
Pipeline construction
Classical pipeline construction. For pharmaceuticals, food/feed
and fine chemicals. Pipelines for beverages in accordance with DIN
11850, ring mains, deionized water pipes, CIP pipelines, compressed
air, process gas pipes, suspension preparation - the list is endless.
From St 37 through the whole spectrum of customarily used materials
to Hastelloy. With all the relevant material certificates.
Engine room of a milk processing line
|
Kefir culture |
CIP station
|
Valve cluster |
|
Good reasons to choose Glatt!
Experience and highly qualified expertise go without saying. An
added bonus: state-of-the-art assembly and installation equipment.
Glatt has been assembling and installing equipment for many years.
It is this experience, backed by a practised team, that forms the
ideal basis for fast, professional execution of any assignment.
The Glatt assembly team benefits from the latest equipment, such
as video endoscopy and orbital welding technology. And as you would
expect, our welders all hold test inspectorate (TÜV) approval
and certification to DIN 287/1.
|
- Certification to
DIN EN ISO 9001
- Welding shop certification to
DIN EN 729-2
- Specialist firm in accordance with WHG 19 and TRbF
- Welding personnel approval to
DIN EN 287-1
- Orbital welding personnel approval to DIN EN 1418
|
 |
 |
|
|
